Coalescer-Filter

The coalescer has been especially designed to remove free water from hydraulic circuits. Costeffective and simple in design, it functions without absorption material: special filter material in special configuration retains the small water droplets floating in the medium and removes them.

Turbidity Sensor PiT 400

The presence of free water in hydraulic fluids results in turbidity, impeding the proper function of the entire system and reducing the service life of the hydraulic fluid and of the circuit components. The PiT 400 sensor has been designed to identify the ingress of water in a circuit, rapidly and reliably. The PiT 400 can be applied in all fluid-based circuits where there is a risk of contamination by water.

Mobile Filter & Service Equipment

Efficient equipment (with a capacity of 27 and 55 l/ min) for mobile bypass filtration in hydraulic and lubricating equipment ensures conformity with predefined cleanliness classes if the correct filter elements are used. It can also be applied in connection with highly viscous media. A rugged pump with high level resistance to contamination guarantees long service life and can be used across a broad area of application. With its service-friendly handling and high contamination retention ability, mobile filter equipment made by MAHLE is the perfect solution when filling systems and reservoirs, when pumping out reservoir contents or to relieve system filters at start-up or following repair work.

Mobile, easy-to-handle measuring instruments incorporating various measuring procedures allow the rapid analysis and measurement of hydraulic fluid contamination. Calibrated to ISO 11171:1999 and evaluated to ISO 4406:1999 and NAS 1638, the MAHLE PiC 9100 portable contamination measuring device records, identifies and registers all particles in both suction and impeller mode and provides a reliable display of absolute particle numbers and cleanliness classes. An essential piece of equipment for maintenance and service!